Shop

3M™ PELTOR™ ComTac XPI (Custom Sets)

385,00788,00

The 3M™ PELTOR™ ComTac XPI Headset is designed to help reduce exposure to hazardous levels of noise, improve situational awareness and at the same time enable two-way radio communication in noisy environments. This product is compatible with other military gear e.g., helmet, protective vest etc.

Delivery: 3 working days – 4 weeks (shipped from Germany)

Clear
SKU: 3M-PELTOR-XPI Categories: , Tags: , , , , , , , , , , , ,
Description

Key Features:

  • Active Hearing protection
  • Level-dependent function for ambient listening
  • “Plug and play”, no start up time
  • Foldable headband for easy storage and transport
  • Voice guided configuration menu
  • Functions: release time, balance, external mute mode, EQ mode
  • Earplug mode (maintains situational awareness when used in combination with earplugs)
  • SNR 39 dB when combined with earplugs
  • Automatic power off after two hours if no function is used
  • No software loads or outside power required, complete self-contained headset with power fail safe
  • Tested according to the applicable parts of military standards
  • ~ 200h (battery & temperature dependent)

Improvements & Differences Compared To Comtac XP:

  • Better sealing of the battery compartment against moisture
  • Better sealing of the board for protection against salt water
  • Removal of all pressure points on the headband (especially noticeable when wearing under helmets)
  • Extensive voice guided menu
  • Volume of connected radios can now be changed
  • Microphone gain adjustable
  • With the in the “Ear-Plug-Mode” the volume of the connected radio will be amplified when additionally using ear plugs with the ComTac XPI
  • Silent mode added – fast shutdown of the outdoor microphones

In The Box:

  • 1x ComTac XPI
  • 1x User Manual
  • 2x AAA Batteries

Optional Dynamic Microphone:
Detachable adjustable microphone with J11 PELTOR™ wired cable for PTT connection to a radio system.
Microphone is an upgraded version since February 2019 with improved ultra noise canceling. It is also waterproof (up to 3 m depth for 30 min) and has protection against dust (IP68).

Optional Flexible Microphone:
Detachable flexible microphone with J11 PELTOR™ wired cable for PTT connection to a radio system.
Microphone is an upgraded version since February 2019 with improved ultra noise canceling. It is also waterproof (up to 3 m depth for 30 min) and has protection against dust (IP68).
For more info on these microphones visit: -> Link to products

Optional Hygienic Gel Set:
Extremely soft-fitting ear pads, filled with silicone gel. Cooling effect prevents perspiration. Very suitable for eyeglass wearers. Fits all 3M Peltor headsets.

Adjustment Capabilities:

Volume:
The volume control controls the level-dependent function for ambient noise. There are 4 adjustment levels and 1 sleep mode. The idle mode is confirmed by a voice message. The volume is limited to 82 dB(A).

Equalizer:
The equalizer sets the tone for the level-dependent feature for ambient noise. There are 4 levels of adjustment: Low, Normal, High and Very High.

Factory reset:
Resets all menu settings to the factory defaults. The setting must be confirmed by pressing [+] after the synthesized voice has said “confirm factory reset”.

Release time:
With the settings for the release time, the time is set after which the limiter for the level-dependent function opens after activation. It can be set in 2 stages: Fast and Slow.

Balance
The balance adjustment controls the volume balance between the right and left ear. There are 7 levels: Middle, Right / 1, Right / 2, Max. Right, Max. Left, Left / 2, Left / 1.

External input sensitivity:
The external input sensitivity setting controls the attenuation of the input signal applied to the input cable. There are 3 levels of adjustment: Low, Medium and High. If low is set, the gain of the applied input signal is low, and when is set high, the gain is large.

Warning signals:
The alert setting disables/enables the low battery and auto power-off alerts. When switched off, none of these warning signals can be heard.

Automatic power off:
The auto power-off setting disables/enables the auto power-off feature.

Ear-plug mode:
The ear plugs mode increases the volume of the ambient noise and the external input by about 6 dB. This mode may only be used if a properly inserted earplug is used under the headset. To turn on the earplug mode, press the [+] button for 5 seconds. Press and hold the key when the synthetic voice says “power off” and after a few seconds the message “plug mode” will be heard. The earplug mode turns off when the headset is turned off and then turned on again.

Standards and Approval:

  • PPE directive 89/686/EEC
  • EMC directive 2004/108/EC
  • MIL-STD-810F
  • EMC-MIL-STD-461F

PELTOR ComTac XPI & PTT – Before You Buy

Additional Information
Weight 335 g
Color

Olive, Black

Microphone

None, Dynamic, Flexible

Hygienic Kit?

Yes, No

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “3M™ PELTOR™ ComTac XPI (Custom Sets)”

Your email address will not be published. Required fields are marked *

1